Auto solar module laminating machine BXM-3623CYD

1.Auto solar module laminator 2.PLC+Touch Screen contral system 3.Electric heating system 4. Easy maintenance

We are one of the biggest suppliers of the solar module line equipments in mainland China, we have customers in

mainland China,Taiwan China, India,Singapore,Malaysia,Bangladesh,Indonesia,Philippines, Italy,Spain,Sweden,

UK,Poland,Austria,Croatia,Germany,Cuba,Argentina,USA,Mexico,Australia,Nigeria,Jordan,etc.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

A,Construction

(1) Three parts Loading area, Lamination area, Unloading area.

(2) Avail lamination area 100mm margin for 4 side.

1, Loading area.

(1) Fixed transferring position, stable and hight precision

(2) Transfer speed of 0.25m/s

2, Lamination area

(1)Heating plate electrical heating type.

(2)Fast heating. Heat up from 20°C to 130°C in 90min.

(3)Temperature uniformity ≤±2°C

(4)Un flatness in 1 square meter ≤200μm

(5)Silicon Membrane easy replaced.

(6)Fencing protection for safety.

(7)Brush roller cleaning the conveyor

3, Unloading area

(1) Stable and hight precision

(2) Equip with photoelectric sensor to avoid drop of the panel.

B,Vacuum system

(1) Maximum vacuum is less than 100Pa, It takes less than 45 s to arrive 200Pa in

Auto mode.(Vacuum pump is close to the machine in 2m)

(2) Air inflation speed is adjustable in 0~50 L/S

(3) Alum when the vacuum can not arrive -0.095Mpa in 40~60S.

(4) Pressure of the air sac of the upper chamber is adjustable in 0~1 pressure atmosphere

(5) Lower chamber exhaust can be separate in 3 section. Upper chamber Air inflation speed is adjustable.

C,Control system

(1)PLC+Touch screen

(2)Calculator for lamination

(3)Inflating speed and pressure is adjustable.

(4)Flexible operation mode.(Including section inflation etc)

(5)Alum Electrical or air pressure over load, Air supply, Vacuum, Oil level,

Over heat, shot circuit, pressure etc.

(6)Defect position shown in time. Fix position for loading and unloading.

(7)Voice alum before out put.

Model	CYD-3623DGM-B	Weight	18T
Control System	Mitsubishi PLC	Operation	Touch screen
Rated power	70kW	Average power	18KW
Dimensions	12.5×3.2×2.2	Avail Lamination area	2100*3400
Heating plate	uniformity: ≤±2°C	Temp control accuracy	≤±1°C
Power supply	AC380V, 5 wires, 3 phase	Temp detect points	13
Vacuum chamber height	32mm	Pressure source	≥0.4 MPa
Pressure air flow	100L/min	Vacuum pump speed	70L/S
Temp control scope	30°C-170°C	Max heating Temp	170°C
Lamination Temp	100°C-165°C	Max Temp	170°C
Operation temp scope	Room temp-170°C	Operation Vacuum	70-20Pa
Heating plate	Un flatness in 1 square meter≤200um	Lamination cycle	Depend on the materials
Vacuum time	5-8min	Upper chember Open heigh	400mm
Upper chember Open type	hydro-cylinder & straight rail lifting	Circumstance Temp	0~40°C
Horizontal heigh	Lower 2000M	Floor requirement	Cement layer ≥15cm